- How to make a DIY jewelery display
- Put a Sock in It
- Double Your Space with Closet Organizers
- Why Getting Bedroom Closet Organizers is A Good Idea
- Drawer Organizers
| Home Organize Your Home The Organized Closet Wire Shelving: A Simple Closet Makeover
ClosetWire Shelving: A Simple Closet Makeover
Looking for a simple and effective fix for your cluttered closet? Wire shelving can create the perfect solution to a chaotic closet. With a variety of solutions and styles, all you need are a few simple tools to create an organized closet.
1. Wire Shelving
Nowadays, there is a whole industry dedicated to helping homeowners organize their lives. Many companies produce ready-made closet organizers, some of which are extremely versatile because the shelves are adjustable. These kinds of creating modern closets are better known as wire shelving.
2. Know What You Need
Like any activities that need preparations, before starting of doing wire shelving, it is a must that you prepare your tools and materials first. For tools, you will be needing
3. Verify The Shelf Size
To verify the shelf size that you need, you have to determine the length of your shelf that will be placed against the wall. Then, deduct about three fourths of an inch provided that the shelf will not tap the wall on a single end. If it does or if the two ends touch the wall, deduct one and one-half of an inch, instead of three fourths of an inch. Thereafter, cut down the portion of the shelving into the appropriate lengths with the use of a hacksaw or the bolt cutters. Be careful when doing this. Keep in mind that you should not cut closer than 1 inch to the perpendicular spacers on the border edge of the shelf.
4. Determine The Type Of Wire Shelving
Basically, wire shelving is installed against the wall through the use of screw-mounted clips and its support from the brackets. It is important, however, that you know what kind of wire shelving you want. This is because the method of mounting the clips is entirely dependent on the wall materials.
For example, for a concrete wall, you need to make a one quarter inch hole deep with a masonry bit and fasten the clip with a 8 x 1 inch screw. If your wall, however, is solid wood, then the installation should start from cutting the rear projection from the clip and securing the clip against the wall with a 8 x 1 inch wood screw.
5. Experience The Difference
About The Author: For more great wire shelving related articles and resources check out http://www.shelvinghq.com. For more free-reprint articles by Patrick Steiner please visit: http://www.isnare.com/?s=author&a=Patrick+Steiner